ABSTRACT
Ursodeoxycholic acid has gained increasing attention due to its recent discovery of the preventive effect on SARS-CoV-2 infection. Ursodeoxycholic acid has been included in various pharmacopoeias as an old drug, and the latest European Pharmacopoeia lists nine potential related substances (impurities Aâ¼I). However, existing methods in pharmacopoeias and literature can only quantify up to five of these impurities simultaneously, and the sensitivity is inadequate, as the impurities are isomers or cholic acid analogues lacking chromophores. Herein, a novel gradient RP-HPLC method coupled to charged aerosol detection (CAD) was developed and validated for the simultaneous separation and quantification of the nine impurities in ursodeoxycholic acid. The method proved sensitive and allowed the quantification of the impurities as low as 0.02 %. Relative correction factors of the nine impurities were all within the range of 0.8-1.2 in the gradient mode by optimizing chromatographic conditions and CAD parameters. In addition, this RP-HPLC method is fully compatible with LC-MS due to the volatile additives and high percentage of the organic phase, which can be directly used for the identification of impurities. The newly developed HPLC-CAD method was successfully applied to commercial bulk drug samples, and two unknown impurities were identified by HPLC-Q-TOF-MS. The effect of CAD parameters on the linearity and correction factors was also discussed in this study. Overall, the established HPLC-CAD method can improve the methods in current pharmacopoeias and literature and contributes to understanding the impurity profile for process improvement.
Subject(s)
COVID-19 , Ursodeoxycholic Acid , Humans , Chromatography, High Pressure Liquid/methods , SARS-CoV-2 , Respiratory Aerosols and Droplets , Drug Contamination/prevention & controlABSTRACT
ABSTRACT: Our objective was to analyze in vitro the persistence of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) in the packaging material of the drugs dispensed to hospital wards. Additionally, to evaluate if the protection with a double plastic bag prevents the contamination of the medication dispensed to an intensive care unit (ICU).On the first part, different materials containing different drugs within an ICU were sampled to confirm the lack of contamination by SARS-CoV-2. The confirmation of the virus was performed using real time reverse transcription polymerase chain reaction. As a control group, in the microbiology laboratory we inoculated the virus into the different surfaces containing the same drugs included in the first part. Samples were obtained with a sterile swab at 3, 6, 8, 10, 14, 21, and 30âdays after inoculation and analyzed through real time reverse transcription polymerase chain reaction.None of the studied materials containing the drugs within an ICU was contaminated by SARS-CoV-2. In the second part, SARS-CoV-2 was found in all surfaces for up to 30âdays.The use of double-bag unit-dose system to deliver medication in a pandemic seems effective to prevent the potential transmission of SARS-CoV-2. A striking SARS-CoV-2 RNA stability of up to 30âdays was found in the surfaces containing the drugs.
Subject(s)
COVID-19/prevention & control , Disease Outbreaks/prevention & control , Drug Contamination/prevention & control , Intensive Care Units/standards , Pharmaceutical Preparations , COVID-19/epidemiology , Hospitals , Humans , RNA, Viral/genetics , RNA, Viral/isolation & purification , Real-Time Polymerase Chain Reaction , SARS-CoV-2Subject(s)
Drug Packaging , Pharmaceutical Preparations/analysis , Technology, Pharmaceutical , COVID-19 , Drug Contamination/prevention & control , Patient Safety , Pharmaceutical Preparations/standards , Pharmaceutical Preparations/supply & distribution , Quality Control , Risk Assessment , Technology, Pharmaceutical/standardsABSTRACT
Favipiravir is an established antiviral that is currently being assessed as an investigational drug for the treatment of COVID-19. Favipiravir is strikingly similar to two molecules that the World Health Organization (WHO) lists as essential medicines, which also consist of a six-membered aromatic N-heterocycle bearing a carboxamide function: the anti-tuberculosis agent, pyrazinamide, and nicotinamide, also known as vitamin B3 . We demonstrate the utility of 1 H nuclear magnetic resonance (NMR) profiling, an emerging pharmacopoeial tool, for the highly specific identification, selective differentiation of congeners, and subsequent detection of drug falsification or adulteration of these medicines. The straightforward comparison of basic 1-D 1 H NMR spectra, obtained with benchtop or advanced NMR instruments alike, offers a rapid identity assay and works independently of physical reference materials. This approach accelerates and advances pharmaceutical quality control measures under situations of increased drug demand and altered economy, such as during a pandemic.
Subject(s)
Amides/analysis , Antiviral Agents/analysis , Drug Contamination/prevention & control , Niacinamide/analysis , Pyrazinamide/analysis , Pyrazines/analysis , Quality Control , Amides/chemistry , Antiviral Agents/chemistry , Niacinamide/chemistry , Proton Magnetic Resonance Spectroscopy , Pyrazinamide/chemistry , Pyrazines/chemistry , World Health OrganizationABSTRACT
Hydroxychloroquine is an antimalarial drug indicated in the treatment of acute attacks of malaria due to Plasmodium vivax, P. malariae, P. ovale, and susceptible strains of P. falciparum. It is also used for the treatment of rheumatoid arthritis, discoid and systemic lupus erythematosus, and more recently proposed in COVID-19 therapy. Hydroxychloroquine is only available in tablets which are not easy to administer for pediatric and geriatric patients, and patients unable to swallow such as patients found in intensive care units. The aim of this work was to develop and optimize a ready to use liquid hydroxychloroquine formulation and to carry out the corresponding chemical and microbiological stability studies. The formulation was evaluated for ease of preparation, physical properties, and palatability. Its stability was performed at ambient temperature and under refrigeration. After 6 months of stability testing, the results showed no pH change, no drug loss, no microbial development, and no visual change. The formulation, employing excipients in a range that EMA has recommended, showed chemical and microbiological stability for at least 6 months even in the worst storage conditions.
Subject(s)
Antimalarials/chemistry , COVID-19 Drug Treatment , Hydroxychloroquine/chemistry , Chromatography, High Pressure Liquid , Drug Compounding , Drug Contamination/prevention & control , Drug Stability , Humans , Quality Control , Suspensions , TasteSubject(s)
Biological Products/chemical synthesis , Manufactured Materials/virology , Pharmaceutical Preparations/chemical synthesis , Plasma/chemistry , Transmissible gastroenteritis virus/physiology , Virus Inactivation , Animals , Betacoronavirus/physiology , Biological Products/isolation & purification , Drug Contamination/prevention & control , Humans , Hydrogen-Ion Concentration , Immunoglobulins, Intravenous/biosynthesis , Immunoglobulins, Intravenous/isolation & purification , Pasteurization/methods , Pharmaceutical Preparations/isolation & purification , Plasma/virology , SARS-CoV-2 , Safety Management/methods , Safety Management/standards , Swine/virology , Treatment OutcomeABSTRACT
This article reviews currently available scientific literature related to the epidemiology, infectivity, survival, and susceptibility to disinfectants of Coronaviruses, in the context of the controls established to meet good manufacturing practice (GMP) regulations and guidance, and the public health guidance issued specifically to combat the COVID-19 pandemic. The possible impact of the COVID-19 pandemic on the pharmaceutical supply chain is assessed and recommendations are listed for risk mitigation steps to minimize supply disruption to pharmaceutical drug products. Areas addressed include a brief history of the COVID-19 viral pandemic, a description of the virus, the regulatory response to the pandemic, the screening of employees, the persistence of the virus on inanimate surfaces, cleaning and disinfection of manufacturing facilities, the use of GMP-mandated personal protective equipment to counter the spread of the disease, the role of air changes in viral clearance, and approaches to risk assessment and mitigation. Biological medicinal products have a great record of safety, yet the cell cultures used for production can be susceptible to viruses, and contamination events have occurred. Studies on SARS-CoV-2 for it ability to replicate in various mammalian cell lines used for biopharmaceutical manufacturing suggests that the virus poses a low risk and any contamination would be detected by currently used adventitious virus testing. The consequences of the potential virus exposure of manufacturing processes as well as the effectiveness of mitigation efforts are discussed. The pharmaceutical supply chain is complex, traversing many geographies and companies that range from large multinationals to mid- and small-size operations. This paper recommends practices that can be adopted by all companies, irrespective of their size, geographic location, or position in the supply chain.